Liquid:

Argas T40's 40-liter (10.5 gallons) liquid capacity.

Dry: 

The Agras T40 Spreader can carry 110 lbs (50kg) of dry material and has a 70 Liter (18.5 gallons) dry-tank. 

DJI states that the Argas T40 is capable of 40 acres per hour for a stated total of 400 acres per day. 

On the liquid tanks- our industry experts tout 2 gallons per acre (GPA) as the carrier volume for the DJI T40.

The T40 dry tank can spread 1.5 tons of dry material per flight hour at the standard flight height spreading 133 lbs per acre (150 kg per hectare). 

Overall and realistically - we feel our flight and ground crew can cover 200 acres flown per day as a reasonable estimate.

Drones utilize a vortex effect created by the rotor wash to help spread out and distribute the atomized liquid across a swath that is wider than the actual drone. The swath is affected by this vortex effect along with application height, nozzle selection, spray rate and spraying speed.

The DJI Argas T40 can create a max swath width up to 9.75 meters (32 feet)

The spread pattern of the granular spreader varies widely depending on product and drone elevation, typically ranging from 20-35 ft.

In an attempt to be as environmentally and resource friendly as possible, our ground crew's rig transports water in order for us to use with our on-board mixing system on site. Only the amounts and batches needed are made helping you to conserve resources and reduce waste.

Flight Time varies, but typically ranges from 8 to 15 minutes.

Our batteries re-charge in under 10 minutes.

Full scale operations once the craft is on the ground we strive for a battery swap and tank re-fill in 60 seconds or less!

YOU are the expert on YOUR property.

• YOU tell us what to spray.

• YOU tell us where you need us.

We are the experts on safely applying liquids and dry materials from the air in the most cost effective manner.

By pairing your knowledge and expertise about your property with our knowledge and skills, together we can maximize yield with the same acreage. 

For that reason, we rely on YOU for what your crops need and where, we'll take care of accuracy, saturation, and ensuring a job well done - the first time.